V-tuf Rapid Vts240hpc Mobile Pressure Washer

• RAPID VTS HPC 240v Hot-Water Stainless Industrial Mobile Pressure Washer - 1500psi, 100Bar, 12L/min - High-Pressure Chemical Penetration
• Features:
• Heats Water to 90oC on full pressure and up to 150oC on stream stage
• High-Pressure Chemical Penetration.
• Easy to Use / Easy to Transport.
• iDPS (Intelligent Digital Protection System) - see below.
• Boiler Protection Against Low Water Pressure.
• Energy Efficient Boiler.
• Simple Adjustable Temperature Control & Switch.
• Double Pass Heat Exchanger Guarantees Hotter Water with Less Fuel Usage.
• Fully Protected Electrics from Water Ingress.
• Can be used with HVO fuel to reduce GHG Emissions by up to 90%.
• Comes complete with Quick Release 10m Hose & Lance & Nozzle Kit.
  
  
• V-TUF RAPID VTS 240v Hot-Water Compact Heavy-Duty Pressure Washer is popular for day-to-day monotonous cleaning tasks tackling large amounts of grease, oil, dirt, or stubborn dirt.
• The RAPID-VTS steam cleaner swiftly lifts all deep-rooted thick sludge, dirt, and grime from all hard surfaces.
• With a solid steel chassis, and stainless-steel cover, the RAPID-VTS Industrial Mobile Pressure Washer is rugged, durable, compact, which is why contract cleaners enjoy using this machine for use in all industries, including; Agriculture, Industry, Automotive, Transport, Construction & Public Services.
• The V-TUF RAPID-VTS hot water electric pressure washer offers a time saving of up to 35% with drastically improved cleaning results compared to a cold-water model.
• Cleaning using hot water offers optimises the cleaning process by allowing you to use less chemical, as well as impressive cleaning results.
• Oils & Greases are known to be hard to clean, especially in food factories, but using Hot water softens congealed oil and grease and radically improves emulsification, making it very easy to efficiently remove, clean, and sanitise.
  
  
• Benefits:
• High-Pressure Chemical Penetration - Deep-Clean Detergent into Dirt & Grease - Ideal for Heavy Plant.
• Superb Cleaning Performance.
• 100% 304 Stainless Steel (Highly Corrosion Resistant) Cover & Chassis.
• Thermostat - Full Control of Temperature.
• Minimal Long-Term Maintenance.
• Energy Efficient & Low On Emissions.
• Simple Electric Circuits - (Guaranteed No PCB's & Electrical Faults).
• High efficiency double pass heat exchanger with 3 second purge time offers you hotter water while using less fuel and clean combustion.
• The simple strategically placed control panel is easy to operate and has IP56 electric protection.
• Automatic stop and start – which increases pump seal life (TTS).
• Low water burner Cut-Out - reducing expensive damage from water shortage.
• Safety pressure valve: visible and direct on the pump (following all European regulations).
• Pressure can be regulated, and the regulation wheel is direct on the pump and easy to reach.
• Built-To-Last: Powder Coated Chassis & Anti-Corrosive Stainless-Steel Cover.
• Low Rev Industrial Motor with Thermal Protection.
• Hot-Water Cleaning Removes Grime & Grease Quicker Than An Equivalent Cold-Water Machine - With Quicker Drying Time.
• 24 Litre Easy-Fill Removable Fuel Tank.
• Minimal Long-Term Maintenance & Running Costs.
• The pump is lubricated with top specification V-TUF PRESSURE LUBE which contains MSM which virtually eliminates friction and wear. Pump lube level visible from outside the machine.
• Lance storage holder on the side of the cover.
  
  
• Features:
• Quieter running - Sound Level - Sound Level : up to 10% less than some of its competitors
• Tough, easy running pump - The proven V-TUF XHDM300SS low revving European pump is 200 bar rated with a heavy duty crankshaft design with hard wearing ceramic plungers and a brass pump head. Servicing is straight forward and spares availability is excellent.
• The XHDM300SS pump is lubricated with top specification V-TUF PRESSURE LUBE ( PL500 ) which contains MSM which virtually eliminates friction and wear. Pump lube level visible from outside the machine.
• Pressure can be regulated and the regulation wheel is direct on the pump and easy to reach.
• High efficiency double pass heat exchanger with 3 second purge time offers you hotter water while using less fuel and clean combustion.
• The simple but robust stainless steel control panel is easy to operate and maintain with clear visible warning lights. The control circuit is a safe 24volt low tension electrical control with IP56 electric protection.
• Stainless steel double lance holder on both sides of the cover.
• Low Fuel Cut Out - to prevent damage to the fuel system
• Complete machine safety shut down if the unit is not used for an hour
• 4 x large robust wheels – ideal for rough terrain
• Quick release KTQ 350 bar Optigun lance system with 10m of hose and Opti-spare 10m Duraklix MSQ coupling system,
• Chemical injection system with Micro-Controllable Detergent flow regulator.
  
  
• V-TUF iDPS (Intelligent Digital Protection System) included which means:
• Delayed Auto stop (30 second delay stop motor with immediate start) – reduces wear on motor and pump
• The machine will shut down after 1 hour is not used – safety and reduced fire risk
• Low Water Cut-Out - reducing expensive damage from water shortage.
• The machine will stop if the motor overheats
• Water leak detection shut off - reducing unnecessary wear and expense.
• Safety pressure valve: visible and direct on the pump (following all European regulations).
  
  
• Areas of Application:
• Construction Site Equipment; Cement Mixers, Diggers, Dumpers, JCB & CAT Machines etc.
• Cement Plant
• Foundries
• National Multi-Storey Car Parks
• Tractors, Harvesters, Cultivators, Ploughs & Trailers, Cattle Barns, Building & Floor Restoration Services, Drain Blasting & Cleaning
• Courtyards: Schools, Universities, Hospitals, Shopping Centres, Sports Grounds, Driveways, Paths & Patios, Boats, Yachts & Ships.

• Power Supply: 240v (13Amp 3-Pin UK Plug)
• Power Rating: 2200w (3HP)
• Flow Rate: 12 Litres/Minute (720 Litres/Hour)
• Operating Pressure: 100 Bar / 1500 psi
• Container Capacity: Diesel Fuel Tank for Boiler: 24 Litres
• Hot / Cold Water: Hot & Cold Water
• Temperature: 40oC - 150oC / 90oF - 370oF
• Sound Level (dB(A)): 90 dBA
• Chemical Injection: Yes (with High Pressure Chemical Penetration System)
• Pump Type: Self-Priming (Positive 3 Plunger Displacement)
• Power Cable: 5m
• Accessories Included: 10m High Pressure Steam Cleaner Hose & Quick Release Lance & Vario Nozzle Kit
• Warranty: 12 Months
• Product Dimensions: Box: (H) 800 x (W) 1200 x (D) 800mm, Washer: (H) 720 x (W) 620 x (D) 1000mm
• Weight: Nett: 100kg / Gross: 110kg

• Email: orders@toolbritannia.co.uk
• Opening Hours: Monday - Friday (7:30 am - 5:00 pm)
  Saturday (9:00 am - 1 pm)

All orders are delivered using our vans or our special courier service. Deliveries are normally made on mondays to fridays unless special arrangements has been agreed. Your order will be dispatched within 1 - 3 working days of receipt (or sooner) using the service you have indicated.

Please note that orders placed after 3:30pm on a working day, may be processed from the next working day. For example, if an order is placed by 4pm on a Friday and 1 - 3 working day delivery option was selected, the order will be processed from Monday and estimated delivery day of either Tuesday or Wednesday.

1 – 3 Working Days Delivery

• Order Value up to £90 Incl VAT - £6.95 Carriage
• Order Value over £90 Incl VAT - Carriage FREE
• For UK offshore, Highlands, Northern Ireland, Jersey, Guernsey and Isle of Man there will be an additional carriage cost regardless of order value.

Next Working Day Delivery

• Next day delivery is available on all stock items ordered before 3:00pm (Monday – Thursday) irrespective of order value unless stated otherwise - £8.95 Carriage.
• Next Working Day Service is not available to UK offshore and Highlands.
• Next Working Day Service is not available on heavy items.

Saturday Delivery

• Saturday delivery is available on all stock items ordered before 3:00pm Friday irrespective of order value unless stated otherwise - £20.00 Carriage.
• Saturday Delivery Service is not available to UK offshore and Highlands.
• Saturday Delivery Service is not available on heavy items

Heavy Item Delivery

• Some products have been classified as a heavy item and will incur extra shipping charge. Please allow 3-5 working days for delivery

Special Delivery Options

• Saturday Deliveries - Please contact us for carriage cost.
• Export Deliveries - Please contact us for carriage cost

Returns

• If, within 14 days, you wish to return an item for any reason the item must not have been used/opened and in resalable and working order, if this criteria is met the customer will be fully responsible for shipping the item/items back to us, this is to protect us from any form of collection fee we might experience and upon receipt of goods a refund will be issued should the item be in suitable condition.

Back Orders

• If your item is not in stock, we will back order for you. You will always be emailed with the expected delivery date and you will have the option to cancel your order if you would rather not wait. A refund would be made in this instance.

Tax Charges

• For all orders placed for delivery within the UK or European Union, 20% VAT will be added. Orders placed for export outside of the EU can be supplied VAT free. Please contact us for details.